Windsensor Industry
The wind sensors impress with high accuracy, simplest mounting methods and ultimately robust, sea water proof materials.
The optimal heating of the sensor head and minimum powerdemand of the system are made possible by thermal decoupling of the housing shaft.
Recommended for:
- wind power plants
- building services
- wind warning devices on cranes
- industrial applications
- in all climate zones
- environmental measurements
The wind sensors offer:
- percision, tradition and future reliability
- large operative measuring and temperature range
- simplest mast mounting
- very good starting values through magnetic, contactless measuring principle
- optimal heating concept
For more information or to make an enquiry contact us.
Product Specification
| Technical Data | Windsensor INDUSTRY |
| Wind Direction | |
| Dimensions | Blade wind vane L 232mm/H 307mm dimensionally stable, plastic |
| Weight | ca. 0.35 kg |
| Measuring range | 0...360° |
| Resolution | 2° |
| Accuracy | +/-2° |
| Starting value | < 0.7 m/s |
| Output | 0(4)...20 mA/max. load 600 Ohm |
| Wind Direction | |
| Dimensions | 3-armed cup-Ø 95mm/H 230mm |
| Weight | approx. 0.25kg |
| Measuring range | 0.7...50m/s |
| Resolution | < 0.02m/s |
| Accuracy | +/-2% FS |
| Starting value | < 0.7m/s |
| Output | 0(4)...20 mA = 0...50 m/s, max. load 600 Ohm |
| Measuring Principle | Hall Sensor Array |
| Output | |
| Range of application | temperatures -30...+70°C heated, wind speed 0...60m/s |
| Supply voltage | 24 (20...28) VDC, max. 800 mA electr. controlled heating, 18 W |
| Housing | Aluminium, anodized, IP53, Ø 32mm |
| Bore | Ø 30mm for mounting at traverse |
| Included in delivery | cable with plug 12m, ready made |
Featured Products
Designed and created by Mark Redgrave
©Equinox Instruments Ltd 2010